1. Home
  2. Products
  3. Plastic Injection Molding Machine
  4. Automatic Multiple Cylinders Injection Molding Machine (LCS-MB)
  • Automatic Multiple Cylinders Injection Molding Machine (LCS-MB)
Automatic Multiple Cylinders Injection Molding Machine (LCS-MB) Automatic Multiple Cylinders Injection Molding Machine (LCS-MB) Automatic Multiple Cylinders Injection Molding Machine (LCS-MB)
Automatic Multiple Cylinders Injection Molding Machine (LCS-MB)
Unique Two Platens Design
DIRECT CLAMPING FORCE BUILT UP BY MULTIPLE CYLINDERS
  1. The actuator of the clamping force installed on the fixed platen of the conventional two platens injection molding machine.
  2. The design of the MBE model has four sets of traveling cylinders inside of the movable platen to close the mold and to build up the clamping force at the center of the platen.
  3. The force is distributed evenly on the platen and creates zero deflection when the injection force activates.
  4. The clamping force makes a full release before the mold opens, so there is no issue of failed opening such as a mechanical deformation of the toggle under the conditions of a long cycle.
  5. The standard feature of the proportional valve with LVDT feedback achieves high precision of mold open-end position.


Long Opening Stroke
FLEXIBLE CHANGE TO OPENING STROKE & MOLD THICKNESS
  1. Providing high flexibility for a mold requiring longer thickness and can be extended if required.
  2. The maximum mold height, the daylight, or the ejector stroke, can be revised by special request.
  3. Dual traverse cylinders are installed at the opposite corner of the fixed platen to shorten the dry cycle and to ease the access to the purge area and the nozzle.


Centralized Distribution of the Clamping Force
THE ZERO PLATEN DEFORMATION MAKES PERFECT MOLDING PRODUCTS
  1. The clamping force is uniformly distributed at the center of the platen to perfectly keep the two platens parallel.
  2. The tie bars are forced averagely to each piece to avoid the issue of breaking.
  3. The clamping force release is either acting before the mold opens or before charging to reduce the time of pressure release.
  4. Simple and fast mold height adjustment.


Quick Position Locker
THE SPLIT NUT DESIGN OF THE LOCKING DEVICE SHORTENS DRY CYCLE
  1. The split nut design of the locking device works for instant and precise locking force on the tie bar.
  2. Four sets of split nuts lock or unlock separately.
  Specifications:

Suitable electricity: AC 220V 60Hz         Specification subject to change without notice



Suitable electricity: AC 220V 60Hz         Specification subject to change without notice

PP Injection Molding Machine
 
Enquiry Now
Products List