1. Home
  2. Products
  3. Plastic Injection Molding Machine
  4. Toggle Type Plastic Injection Molding Machine (LCS-B)
  • Toggle Type Plastic Injection Molding Machine (LCS-B)
Toggle Type Plastic Injection Molding Machine (LCS-B) Toggle Type Plastic Injection Molding Machine (LCS-B) Toggle Type Plastic Injection Molding Machine (LCS-B)
Toggle Type Plastic Injection Molding Machine (LCS-B)
Clamping Concept
STANDARD FEATURES OF CLAMPING UNIT
  1. The tie bars are nitrified to present a high rigidity and a better wearing resistance.
  2. The 5-point vertical toggle mechanism aims to achieve a rapid opening/closing of the mold, a longer clamping stroke, and to stabilize the movement of the clamping mechanism.
  3. The standard hydraulic design of a fast clamping shortens the dry cycle time and saves power.
  4. The low-pressure function is to ensure good protection of the contact surface of the mold.
  5. A linear transducer precisely calculates the clamping stroke to have a high position accuracy.
  6. The integrated hydraulic circuit reduces the temperature of the oil and efficiency loss.


Injection Concept
STANDARD FEATURES OF INJECTION UNIT
  1. The double injection cylinder design gives a shorter machine length and avoids that the design of the double carriage cylinder may produce material leakage owing to high speed or high pressure.
  2. It includes multi-stage injection parameters like speed, pressure, or position for different kinds of molding conditions.
  3. The set of screws and barrels has been nitrified to strengthen the wear resistance.
  4. A linear transducer calculates the injection and plasticizing strokes to ensure a high positional control.
  5. Screw cold-start protection.
  6. PID temperature simulation.
  7. Anticorrosive bimetallic screw and barrel set (optional accessory).


Standard Equipment
STANDARD EQUIPMENT & ACCESSORY FOR SW-B SERIES
  1. Hydraulic device and electrical control for core puller and unscrewing.
  2. Automatic mold height adjustment.
  3. Automatic oil lubricator.
  4. Air ejector device.
  5. Micro mold adjustment device.
  6. Anti-vibration damper.
  7. Mold clamps.
  8. One toolbox set.
  9. Mold hanger bracket and pulley. (models below LCS-190B)
  10. Ejector rods.
  11. Hopper dryer.
  12. Long & short nozzles.
  13. Water Circuit Distributor.
  14. Pneumatic safety door. (models above LCS-370B)
We have model from 90 tons to 700 tons for selection.


Specification :

Suitable electricity: AC 220V 60Hz         Specification subject to change without notice


Suitable electricity: AC 220V 60Hz         Specification subject to change without notice


Enquiry Now
Products List